|
|
 |
|
 |
  |
Valve Series >> Ball Valve |
 |
|
 CN213
Ball Valve |
- Technical Standard Nominal Pressure: (Brass Body)2.0MPa
- Suitable Medium: Water, Non-Causticity Liquid Saturated Steam
- Working Temperature: -20ºC≤ t ≤ 150ºC
- Parallel Thread Conform To ISO-228-1:2000
- Anti-Oxygen Glue Applied To Join Body & Bonnet
- Nickel Plated & Full Port
- Wb:Brass Body & Brass Ball
Wi:Brass Body & Iron Ball
Wz:Zinc Body & Iron Ball
ball cock valves, mini ball valves
|
|
|
CN214
Brass Compression Ball Valve |
- Nominal Pressure: 2.0MPa
- Suitable Medium: Water, Non-Causticity Liquid Saturated Steam
- Working Temperature: -20ºC≤ t ≤ 110ºC
- Nickel Plated
|
|
|
CN215
Brass Solder Ball Valve |
This valve is designed to be soft soldered into lines without disassembly, using a low temperature solder to 420oF(216ºC). A higher temperature solders may damage the seat material. When applying heat, avoid direct flame to the center of the valves body. Excessive heat can do harm to the seats. After soldering, the packing nut may have to be tightened.
ball cock valves, mini ball valves |
- Nominal Pressure: 4.0MPa
- Suitable Medium: Water, Non-Causticity Liquid Saturated Steam
- Working Temperature: -20ºC≤ t ≤ 100ºC
- Thread Joint Between Body & Cap Using Anti-Oxygen Glue
- Solder Socker To ANSI B16.18
- Full Port
|
|
|
CN216
Brass Solder Ball Valve |
This valve is designed to be soft soldered into lines without disassembly, using a low temperature solder to 420oF(216ºC). A higher temperature solders may damage the seat material. When applying heat, avoid direct flame to the center of the valves body. Excessive heat can do harm to the seats. After soldering, the packing nut may have to be tightened.
ball cock valves, mini ball valves |
- Nominal Pressure: 2.0MPa
- Suitable Medium: Water, Non-Causticity Liquid Saturated Steam
- Working Temperature: -20ºC≤ t ≤ 100ºC
- Thread Joint Between Body & Cap Using Anti-Oxygen Glue
- Solder Socker To ANSI B16.18
- Standard Port
|
|
|
|
|
